NIM-2MFT-T1/E1 Cisco Router Module 2 Port Multiflex Trunk Voice / WAN Network Interface Module

Cisco NIM-2MFT-T1/E1: 2-Port Multiflex Trunk Voice/WAN Module

The Cisco 2-Port Multiflex Trunk Voice/WAN Network Interface Module T1/E1 (NIM-2MFT-T1/E1) is a versatile and high-density solution for Cisco's 4000 Series Integrated Services Routers (ISRs). This module delivers flexible connectivity options for both voice and data services over T1/E1 lines, enabling branch offices to support traditional telephony and efficient WAN aggregation. It seamlessly integrates into your routing infrastructure, complementing your Cisco Network Switch deployments.

Integrated Voice and Data Services

This module supports multiflex trunk capabilities, allowing you to configure each port for either voice or data. It can handle fractional or full T1/E1 lines, providing a consolidated solution for converged network architectures.

Enhanced Modularity and Flexibility

The NIM form factor provides modularity for easy integration into Cisco ISR 4000 Series routers. This flexibility allows businesses to adapt their WAN connectivity and voice gateway solutions to evolving requirements without replacing the entire router.

Reliable WAN Aggregation

Offering reliable T1/E1 connectivity, the NIM-2MFT-T1/E1 is crucial for WAN aggregation in branch offices. It ensures consistent performance for critical business applications and reliable voice communications over traditional leased lines.

Streamlined Branch Office Solutions

By integrating voice and data services on a single module, this NIM helps streamline branch office network deployments. It provides the necessary WAN interface for routing data traffic from both Cisco Network Switch devices and Cisco Wireless AP infrastructure, simplifying network design.

Cisco NIM-2MFT-T1/E1 Detailed Parameters

Parameter Category	Parameter	Specification
Device Type	Model	NIM-2MFT-T1/E1
	Product Type	Multiflex Trunk Voice/WAN Network Interface Module
	Form Factor	Network Interface Module (NIM)
Connectivity	Ports	2 x T1/E1 (RJ-48)
	Interface Type	T1/E1, Multiflex Trunk
	Cabling	RJ-48C for T1/E1 connections
Performance	Data Rate	Up to 2.048 Mbps per E1, 1.544 Mbps per T1
Features	Multiflex Support	Yes (Voice, Data, or Mixed Mode per port)
	Echo Cancellation	Yes (Hardware-based, for voice)
	Protocols	PPP, FR, HDLC, ISDN, etc.
Compatibility	Compatible Routers	Cisco 4000 Series Integrated Services Routers (ISRs)
Physical Specifications	Dimensions (H x W x D)	31.75 x 88.9 x 185.42 mm (1.25 x 3.5 x 7.3 inches)
	Weight (Approximate)	0.23 kg (0.5 lbs)
Environmental	Operating Temperature	0°C to 40°C (32°F to 104°F)
	Operating Humidity	5% to 85% non-condensing
Compliance	Standards	T1/E1 line coding standards (e.g., AMI, B8ZS, HDB3)
	Safety/EMC	Regulatory compliance specific to Cisco NIMs